sprocket cover

I'm after a gearbox sprocket cover for my 2002 AT. If anyone's got a spare in any condition (except totally trashed!) please let me know and what it would cost including P and P. Thanks.

I am trying to remove the front sprocket cover and have undone the two bolts but can't get the cover off. I have looked at the Haynes manual and can't see anything else that could be holding it on. Am I missing something? Looks like something near the bottom stopping it from coming off.

Thanks for your replies.

Well ladies and gentlemen. I brought the bike home this weekend. Left my Hilux at work. So first thing I did was ride to Abingdon Honda to pick up the bits I ordered. They included a new front sprocket, sprocket retainer and new bolts, air filter, snail chain adjuster cams, rear hub nut...

Hi guys I'm nearing the end of my 7 week trip through Central Asia, Altai-Russia and Mongolia. I have a problem, I think, and would be really grateful for suggestions/ comments/ possible solutions. It is also urgent as I fly home to England next weekend (today Sat 25th Aug, flight Sat 1st...

I needed some new grommets for my bash plate, and while another member here kindly sent me some along with a sprocket cover I bought from him I managed to destroy them by spraying them with stuff to try to soften up the rubber a bit (they were on their way out anyway). Undeterred and still...

Wrong day to travel from Chesterfield to Kent. What with the Big Wind (or was it the Great Storm?). Finally got as far as the M11, when the oil pressure light came on :( Found that finger pressure on the rubber cover over the sender made the light go off! Made it to Gravesend - eventually...

hey people! just after a little bit info on what to expect before i pull the engine out and strip it. honestly ive just spent a few weeks doing the bike up and 30mins into riding her i felt her heart stop :( i was just picking up through the gears i think i got into [email protected] then it went. i had...

Ok, I've done 7k miles with my XC now and as all who know me can vouch I'm pretty damned hard on the bike so may incur uncommon faults! The fault I'm highlighting here is a problem with the gear indicator/neutral light. At 1500 miles mine had an issue with the gear indicator which ended with...

Hi, I've got quite a few xr 600 bits for sale, some parts may fit other xr's, some used & some new, wasn't really sure how to price them but all prices include postage and I am open to offers. gold talon 48t sprocket hardly used - £15, wheel bearing removal tool £15 Fuel tank & cap - £40...

Hi guys, great site! I have found a small oil leak this morning which appears in the engine bash plate and looks like its from behind the sprocket cover, haven't got round to taking the cover off but I know (really hoping it isn't) the output shaft seal is behind this and could be leaking or...

:blob7: Hello and best wishes to all (really) big off-road bike fans. With your permission I'd like to use this thread to detail the slow and potentially painful process of managing to make a (half) decent off roader of the mighty Varadero, and how it, and I, fare on this journey of discovery...

Well the GS came and went and after my hols to Spain and next years being talked about with the family already, it makes sense to go again in my van, but I want to take a bike along for riding in Spain. Last week I picked up a 250 exc 2t and its unbelievable fun.. gets me into crazy places So...

So, thumping along on my way back from Devon last sunday in the p-ing rain, and when I got back I noticed that my DID gold chain looked remarkably brighter than when I left. So after removing the coverfrontfront sprocket cover the rubbery bit fell out as one chewed up lump. Qs then: Why is this...

I thought I was finished and only had to tighten the nuts before the first ride. 1). Ran the bike outside the garage on idle last week, front sprocket in place, no sprocket cover, no chain. It ran good and sounded ok, but the front sprocket were spinning like crazy in neutral. But shouldn't...

In brief, this is the problem that I was trying to cure: Gearbox output shaft splines stripped as a result, I suspect, of the sprocket being fitted the wrong way around for long enough to cause wear due to uneven loading. Bike unable to move under its own power. The accepted solutions to...

Hi all, Can anyone point me in the right direction for a front sprocket cover for a 2003 XR400 please? Also where is the best place to get plastics and spares from? Cheers, Chris.

£6.00 (0 Bids) End Date: Monday Jan-24-2011 22:35:38 GMT Buy It Now for only: ***163;6.00 Bid now | Buy it now | Add to watch list More...

£1.99 (1 Bid) End Date: Sunday Jan-23-2011 20:02:50 GMT Bid now | Add to watch list More...

£43.99 End Date: Sunday Jan-23-2011 22:24:54 GMT Buy It Now for only: ***163;43.99 Buy it now | Add to watch list More...