Honda XRV Forum banner

sprocket

  1. Replacing Sprocket and Chain

    Transalp
    Hi all, Sorry for newbie question, but this is my first bike so my first sprocket and chain change! Its on my 1989 XL600V and I just have a couple of Qs: 1. Can anyone recommend where I should get them from? Cant seem to find one on David Silver 2. Do I replace the front and back sprockets? Or...
  2. Hi guys, what is sprockets tooths numbers on an FMX

    Dominator / FMX
    I bought a XR650R (thicker) 15T front sprocket, then I found out that on my FMX front sprocket is 14T. Which is original? 14T or 15T? BTW I found on the INTERNET that people are fitting XR650R front sprocket on XR650L to prevent it from cutting into sprocket splines. Please note that XR650L and...
  3. 520 chain and sprockets on XRV750 RD07a

    I'd like to introduce myself....................
    Hi everybody, I am new to this forum. Just bought an XRV750rd07a full stock that I am planning to rebuild to a lighter and more offroad capable travel bike. One of the ideas is to install Supersprox sprocket and 520 pitch chain to reduce weight. Anyone any advice or experience having done this.
  4. XL700V - temperature gauge going bananas

    Transalp
    Hello folks I'm hoping you can help me pinpoint the cause of a peculiar looking issue with the 700. A bit of background; I've had the bike for a couple of years and recently had the engine rebuilt by a Honda dealer to repair a stripped output shaft. The splines the sprocket mounts onto had...
  5. Varadero - speedo healer

    Other Honda
    I've recently changed front sprocket down from 16t to 15t. The rideability is dramatically improved around town, but it throws out the speedo. 80mph indicated is in fact 70mph. This is something I can deal with, but the odometer is also out, throwing of total mileage the bike has covered (extra...
  6. JT Rubber Front Sprocket

    Africa Twin
    Hi all, Just asking if anybody has experience with JT’s rubber front sprocket on the XRV? We all know why many use the OE Honda front sprocket but since they cost about €30-35 and the JT cost about €15-20 it could be just as good.. Just for reference the JT sprocket is JTF296-16RB. other...
  7. For Sale: XR400

    Bikes For Sale / Wanted
    Hi there As mentioned a few months ago in the XR segment of this forum, I am offering up first dibs on my XR400 to you guys. As I now have osteo arthritis in my right foot, kickstarting has lost its appeal somewhat, mostly as it sometimes hurts, anyway. It is a 1996, P reg. Mileage unknown...
  8. Torque settings for sprockets

    Varadero Technical Specs
    Does anyone know the correct torque settings for the front and rear sprocket nuts?
  9. TA650 Chain install problems

    Transalp
    Hi all I've been riding my trusty Transalp daily now for 12 months. It was time for a new Chain and Sprocket set. I removed everything that was required and gave it all a good clean. Fitted both Sprockets then re-assembled with the new chain. Had some problems with riveting the master link as...
  10. Another worn output shaft thread.....

    Africa Twin
    Sorry to bore you guys with this but I would appreciate your input. I have aquired a 52 plate, September 2002, AT 750 with 60,000 miles on the clock and a buggered output shaft. I have read most of the threads regarding this topic and seen the posts and pictures of the Spendler sprocket and the...
  11. 17t front sprocket on the AT - compatibility

    Africa Twin
    Hello guys, I have a question; I run the 17t front sprocket from JT on my RD04, however, JT does not make the rubberized version of the 17t sprocket (JTF314) which id like to have, they only make the bare 17t version. However - Rugged roads sells the 17t rubberized OEM honda sprocket...
  12. front sprocket shims???

    Africa Twin
    In the process of replacing front sprocket and wondering if there should be shims behind sprocket so that there is no slack when putting locking plate on? There is some play in and out once it is on. No spline wear and it is snug when moving back and forth. My KLR650 has the same type of setup...
  13. 650 review

    Transalp
    From here (2004 - he's in Australia, I think) https://advrider.com/f/threads/living-with-the-honda-transalp-650-now-3-000ks.56814/ ------------------------------ Now that the dust has settled on the new 650 Tranny, these are my observations and experiences thus far. The engine is feeling...
  14. New drive sprocket

    XR
    Hi, ..... I am looking for a bit of clarification please re: my new drive sprocket. The Honda manual (& YouTube vids) all state ..... install with the tooth number stamped on the socket, facing out. (this was the case on the one I just took out) But the new Renthal sprocket I have, appears...
  15. Where does this go?

    Africa Twin
    Good evening I'm in the process of changing the front sprocket on my RD07a. I removed the sprocket cover and then the old sprocket. I was merrily cleaning all the old crud away before fitting the new one when this little fella dropped out. I have no idea where it goes so any help would be...
  16. Will a NX650 RD02 Dominator rear wheel fit a XRV650 RD03

    Africa Twin
    My XRV650 RD03 needs its wheels replaced. It seems it was stored outside on grass for about 17 years. I have managed to get a Transalp 21" front in good condition and a ST1000 Pan European front left hand brake disk. Would a Dominator rear wheel fit? Good Dominator rear wheels are cheaper and...
  17. hand gaurds for the 2005 traqnsalp 650?

    Transalp
    Can anyone recommend hand guards for the above bike. Snapped my hand brake lever ( but managed to manufacture a mock-up for now) Looking at the twist grip there doesn't seem to be provisions for fixing a two point gaurd, which I would prefer (more solid) It seems to be a closed off tube...
  18. Chain and sprocket life

    Transalp
    My 04 650 alp has clocked 31,400 miles from new and is still on the original chain and sprockets, I know the green zone wear indicator will only be a guide to chain life but in the five mil. width the green has I still have one point five mil. left. Also the difference in chain play only varies...
  19. Bike shudders going through gears

    Dominator / FMX
    I am noticing a pretty strong shudder when accelerating particularly from 2nd to 3rd,recently fitted new michelin annakee3, brake pads, chain, sprocket,handlebars,not sure if the bike did it before,it just doesnt seem to be as smooth through the gears as before,the front tyre was not fitted to...
  20. tales of joy and woe on the continent...

    Transalp
    Thought I'd post up a few details of my recent european 'oddessy' on the 'alp. spent the last five and a bit weeks hooning around france, belgium and the netherlands. Had a great time but one or two mishaps along the way. First 'mishap' in Limoges was forgetting to remove the U lock from the...
Top