Honda XRV Forum banner

sprockets

  1. I'd like to introduce myself....................
    Hi everybody, I am new to this forum. Just bought an XRV750rd07a full stock that I am planning to rebuild to a lighter and more offroad capable travel bike. One of the ideas is to install Supersprox sprocket and 520 pitch chain to reduce weight. Anyone any advice or experience having done this.
  2. Transalp
    I have these two. Free to collect from North London, or £10 posted they fit a 650 Transalp, and maybe a 600/700 too? (i'm not sure) - standard 48 tooth rear sprocket - 47 tooth rear sprocket (lowers the revs a little for motorway riding) both only lightly used as per these...
  3. Transalp
    Probably going to need new chain and sprockets this year and just wondering if anyone has tried this JT -...
  4. Varadero Technical Specs
    Does anyone know the correct torque settings for the front and rear sprocket nuts?
  5. Africa Twin
    Hello guys, I have a question; I run the 17t front sprocket from JT on my RD04, however, JT does not make the rubberized version of the 17t sprocket (JTF314) which id like to have, they only make the bare 17t version. However - Rugged roads sells the 17t rubberized OEM honda sprocket...
  6. For Sale / Wanted
    Having a bit of a clear out and the following are up for sale, RD03 rear pegs, rear brake disc guard, lights, rear caliper holders. Rocker covers from an RD07 but I think are the same for RD04. Exhaust guard is provisionally sold. Open to offers.....Also have quite a few front and rear sprockets...
  7. Transalp
    My 04 650 alp has clocked 31,400 miles from new and is still on the original chain and sprockets, I know the green zone wear indicator will only be a guide to chain life but in the five mil. width the green has I still have one point five mil. left. Also the difference in chain play only varies...
  8. Transalp
    Has anyone recently bought a chain and sprocket set that they were happy with, if so from where?? I see they range a lot in price - from £60 for a Chinese special to £150+ If there any 'don't touch' - please let me know. Thanks
  9. Dominator / FMX
    Looking to rder some chain and sprockets for my 2000 model nx650 build. Anyone know the difference between these two?? one says its an upgrade kit, but is less than £5 dearer?? https://www.mandp.co.uk/nx650-dominator-95-02-oe-did-c-s-kit.html...
  10. Africa Twin
    Has anyone tried out the kk bike sprokets? I think they look pretty good If you want to avoid shaft wear. https://kkbike.it/en/120-sprockets If not I just ordered a superpinion and will report back in about 2 years.
  11. Dominator / FMX
    I currently have a 1990 ish motor (without kickstart) that is in need of a rebuild. I have found a good 1988 motor.I believe the early motors had different splines on the gearbox shaft. I am asking because I currently have a 14 tooth sprocket fitted because the motor is in a sidecar that I...
  12. Transalp
    Just changed both sprockets today but the front one (+1 tooth) is slacker on the shaft that the one i took off. As anyone will know who has changed a sprocket the bracket with two bolts to retain the sprocket has to align in the gap on the spline as they do not line up otherwise. Anyone suffered...
  13. Mechanical Advice
    I'm just going through my new to me Transalp 700, fitting a scottoiler and have discovered a major defect in the chain. PO stated chain and sprockets were about 1k old, no discerable wear on sprocket and chain could not be pulled away from the rear sprocket teeth and plenty of adjustment left, I...
  14. Africa Twin
    Hello. I am writing to learn if any XRV750 owners may have learned of premature countershaft or output shaft wearing and continued to ride while monitoring the wear rate. The first image reflects approximately a 30-40% reduction in the width of the splines. Also, please note the condition of...
  15. Dominator / FMX
    Hi all , looking a bit of advice . After 17000 miles and 16 years , I am looking to replace the front and back sprockets and chain on my fx 650 vigor . I see there are a number of options available with more teeth front and back on sprockets . I am probably going for a DID Vx chain . Anyone any...
  16. Africa Twin
    Hi All, (quick question about the OEM rubber cushion) So it's time to change the front sprocket, I was using a JT sprocket for the last 15k km, it fitted well and wore well. Now finally I can fit the famous OEM Sprocket ;). 1. Why is the rubber cushion so big? It touches the chain. That...
  17. Africa Twin
    Hi I'm rebuilding this rd04 and want it to be a bike I can use a lot and be reliable so I'd like to address areas which might cause a problem now it's got new chain and sprockets.its had a new rectifier when last used a new battery and I'm looking at a facet or new points for the fuel pump. Any...
  18. Africa Twin
    Hi All Has anyone fitted this new sprocket to their bike yet.After getting caught in the last panic over worn AT drive shafts I put my name down for one of these sprockets without really taking a look at mine first,Any way it turned up all good so thought I would put it on the bike. I removed...
  19. Africa Twin
    Hi lads, I am just fitting new chain and sprockets to the RD07 this morning. I'm fitting the OEM front 16t sprocket and JT 45t on the rear which was all good so far but the chain just doesn't seem to be going around the front sprocket for some reason, it's like the teeth are too thick or the...
  20. Transalp
    Well, that's weird. I just fitted a very lightly used chain and sprocket set bought from Germany, in great condition. The front sprocket looks to be a genuine Honda one with '15K' stamped in the rubber. It has no visible wear on its teeth yet it is a sloppy, wobbly fit on the shaft. The...
Top