Just curious if anyone has a step by step video showing the procedure for valve check and adjustment. I ride a 2008 XL1000 with approx. 44,000 kilometers on the odometer.
Or does anyone have any helpful tips?
my output-shaft is completely flat, no way around it! gotta open the engine.
is there any thread here or anywhere with a step by step how to change it? and also would like to know you´re opinion on the shaft from cms parts and the gasket kit from poland that appears a lot on ebay. any...
Veteran film and television comedic actor Robin Williams was found dead on Monday. He was 63.
The cause of death is believed to be suicide via asphyxiation, according to the coroner’s office in Tiburon, Calif.
He was found in his home.
According to his publicist, who confirmed the news, the...
I have been struggling with the carbs and need to clean them but need some help to get the carbs off.
Does anyone have a step by step to remove the carb or can it be cleaned whilst on the bike
I have been looking for a manual but hard to find locally in FRance
My radiators have a good build up of limescale which i would like to remove
thinking of using this
Halfords | Holts Radflush 2-Step (2x250ml)
Halfords | Bars Flush Cooling System Cleaner
anyone used these?
are they safe to use on a motorbike?!
Steptoe and Son's Wilfrid Brambell is latest BBC star accused of child sex abuse | Mail Online
One of my all time faveourite comedies is Steptoe & Son... I refuse to beleive it!
Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!
My blue ta650 was blown over a few wks ago,[fierce plymouthian winds] and the right side front blue fairing now has some deep scratches. i wondered if anyone new a step by step guide to a decent repair. Thanks!
i am in the process of making my CRF Road-legal. The bike is already registered and has a number plate...so i got myself a pro-racing lighting kit & speedo etc.
step 1: fix new tale section - brake light, numberplate light & holder
step 2 replace old odometer with new Speedo...
Well, I decided to fabricate some Carbon Fiber parts for my RD07 and started to read/watch/ear/eat/sleep every kind of information I could get on the subject.
£200 (in supplies) later, I started to make the mold for my first attempt.
Although the pics make it look quite simple, ther is a lot...
Title of new thread comes from the good book page 44 (XRV750 N.pdf).
Getting components ready for powder coating . Noticed that the Pillion Step on both of the holders have rattled the the hole that the step bar joint pin goes into . OK if I get a new pin it will be to small for the hole . The...
I have been quietly worried that I may be going (as we say up here) DOO-LALLY !!
I have noticed that I am starting to forget things - people's names , and some major things like, forgetting to take the car in for a service - that I booked !!.
Anyway , yesterday I took another major step...
One step back, Or Bugger! as it is sometimes known!
I set about putting right all those little things that bug you when you get a "new" old bike, the worn bit here, the missing screw there, well I am sure you get the idea. For me it was fit the newly aquired sprocket cover, which first meant...
Step 1; get a spare rear shock. Check (thanx, Sean).
Step 2; strip said shock into its various components and measure up. Check
Step 3; "find" or make/adapt some kind of (remote) preload adjuster to said shock :?
This is where you lot come in :roll:
There's a wealth of experience out...
Looks like the wearing down exercise has worked and I have approval to find a bike. Only need to sell the Dakar now, which incidentally now has a problem with the damping on the rear suspension - I'm hoping it'll be covered under warranty despite it having run out, just waiting for the dealer...