Wonder if anyone can tell me what the small rubber bung is for directly under lower suspension mount on the swinging arm on my 07 650 TA.It appears that a small amount of grease is coming from it.Thanks.
Can someone recommend the best type of chain lube to get for my @, some are like a grease others spray on more like oil? I am sick of getting black crap all over the frame swinging arm and spokes lol
thanks in advance
Having just popped my wheel back in I thought I'd check the alignment, and noticed that the distance from the LHS of the swingarm to the rim is 7cm, and 5cm on the RHS...Is the swingarm symmetrical, or is it offset cos of the sprocket etc?
Hello from a Newbie !
I don't know if anyone can give me some advice, but I was recently given an 89 TA, mechanically good but in a very sorry state. It needs stripping down and rebuilding.
I have got as far as the swinging arm removal and have become stuck !!
The nut came off ok, the...
anybody had a rusted swinger,just took mine out to do the bearings and noticed a little rust hole,so after a little tap it was a big hole,and on the other side of the braced part what now new swinger or get it welded
After spending some time (don't ask!) getting the swingingarm bolt out I now need to buy the bearings. Popped down to my local Honda dealers and the quote was over £100! Ouch!
I have seen them for about half that and wonder if anyone could give there experience here. I need the whole lot...
Anyone able to measure the distance between the swinging arm where the rear axle fits in (or knows where I can find the data) as I've aquired such a bike and the rear wheel wont tighten up! I've check the fiches and all looks OK so maybe wrong arm??
Hi everyone,having trouble getting bolt out of swinging arm on xr400,tried loads of releasing fluid,got nut off,rounded head off on bolt,tried knocking bolt through to no avail,anyone know if bolt is threaded?