Honda XRV Forum banner

ta

  1. Africa Twin
    Hi everyone! I recently remove the tank, airbox and carburators to change the main jets after changing to a more open exhaust. Know putting everything back I have a small problem... There is several fuel overflow or drain lines connected together to one main line that dumps excess fuel it...
  2. Africa Twin
    Hi all i’m in the middle of restoring a 1988 RD03 from Switzerland. looking for the square headlight cowl and a tank. both need to be in good condition and not in need of painting. I already have both parts but the bike has been given a crazy paint colour so it might cost me more to restore what...
  3. For Sale / Wanted
    Transalp 1992 600 cowl& screen, dash, RH side panel, front bracket More bits from my ‘naked’ TA project look at the pictures Dash panel £6 Front bracket (bit bent see pics) £5 Cowl & standard size screen £25 RH side panel £25 (LH side panel was cut up for project but not used! ) Collect from...
  4. For Sale / Wanted
    A set of Givi (I think!) crash bars that fit all 600 Transalps (according to EBay sellers) They are used and have scratches and a small dent (filled) They have been given a coat of black paint to preserve them. They were removed from a 1992 TA (pictured) as I am making a naked TA. To be...
  5. Transalp
    Hi new to this forum, and suffering from ducks disease i want to lower my 650 ta been told sv650 curvy rear shock will fit,and is 10 mm shorter, any confirm od debunk this please.
  6. Africa Twin
    I know a few have members have done this conversion, my question is do I have to have a petrol pump ?
  7. Bikes For Sale / Wanted
    Hi, I am after some wheels for the TA XL650, mine have pitted and cracked in places, if anyone has one for sale?
  8. Transalp
    The ‘93 600 TA I just bought has had a bit of a meltdown in the relay/regulator area, but been repaired and has run okay for quite a while. Apparently. When I bought it I pulled the panels, tank and seat off just to have a general inspection. I pulled a few wires out, checked connections and...
  9. Transalp
    I've seen multiple people on this forum fit an AT sumpguard on their 650 Transalp's. But how? :o I don't think the mounting points line up. The AT one has 2 in the front instead of the TA's 1... I found a user named Tramp talking about a recent post he made where he explained it but i can't seem...
  10. Mechanical Advice
    Im Looking for tank badges/logo for my CG125 tank. The spacing between screw mounting holes is 60mm, but all the badges i can find on fleabay are 67mm spacing between holes. Anyone bought any of these in the past for their CG125 tank with 60mm hole spacing?
  11. Dominator / FMX
    Im Looking for tank badges/logo for my CG125 tank. The spacing between screw mounting holes is 60mm, but all the badges i can find on fleabay are 67mm spacing between holes. Anyone bought any of these in the past for their CG125 tank with 60mm hole spacing?
  12. For Sale / Wanted
    The sumpguard on my TA 650 really isn't up to the task so i want to fit an AT one. :grin:
  13. Africa Twin
    Hello Everyone, I came out to find what appears to be a clear film separating from the tank with water or air trapped underneath, after a night of heavy downpour. The safety stickers appear to be on the outside which suggests that this clear coating is original. Has anyone experienced anything...
  14. Dominator / FMX
    Hello, I guess this is my first post here. I hope to post more. I have bought an FMX 650 2006. There are no stickers on it, except one on front fender, and one on right gas tank side, but they are not original. I was wondering, is there any electronic version of stickers, whether they are...
  15. Mechanical Advice
    I have removed my fuel tap off my CG125 tank, and the in the hole where the fuel tap goes, there seems to be a plastic insert (looks like a tube). Can this be removed? Need to get everything removed before i flush out tank.
  16. For Sale / Wanted
    Does somebody have a second hand pair of TT or AQ crashbars for the TA 650? :grin: Cheers Pics for reference
  17. XR
    Hi Team, Just thought I'd ask on here before I put a good hole in £300... does anyone have an oversize tank for an '02 XR400 floating about? Was after the IMS 4.0 gallon one in Natural colour, but would also be happy with a Clarke or Acerbis. Done a lot of looking around, and 98% of them are...
  18. Transalp
    Greetings, I'm hoping someone can shed some light on a little bump in the road I've come across in my build. As the title states I've thrown a NT650 / Bros 650 / Hawk 650 motor in a Transalp frame and my issue is the front cylinder's exhaust port isn't allowing me to get the Hawk's front header...
  19. Transalp
    Hi all, I'd originally posted this thread on advrider.com before I was pointed over here as somewhere that might be able to give a bit more help. I'm going to simply copy and paste the first couple of updates from that thread over here and see if you guys can offer me a bit of guidance on how...
  20. Transalp
    Hello, i notice one of my grommet's is missing and I would like to replace it Looking at the Honda diagrams they seem to be coming up as Air Cleaner Case Grommet's and the part nr is 83551-300-000 Can anyone confirm ta Rod
Top