Honda XRV Forum banner
ta650
1-20 of 55 Results
  1. For Sale / Wanted
    SOLD £150 A complete set of Honda luggage for 99-02 (carb) Varadero boxes, racks and fittings removed from 99 Varadero XL1000V. The Honda panniers tuck in closer than most aftermarket boxes of the similar capacity and the pannier racks fit closer around the silencers. The topbox has the Honda...
  2. Transalp
    now Avon Gripsters are no longer available I am considering replacing the rear with a Mitas MC24 ( I have them on the TA600) or E-08 (cheaper than MC24 & bit more road orientated). I only use the TA650 on the road or gravel but many local roads are poorly surfaced and often quite muddy. There...
  3. Transalp
    Moving onDecided that a cull will be needed of all sorts of stuff that I've not got around to dealing with over the last few years, so ... Output shaft from my ’06 TA’s 11,422 mile engine. If anyone wants to make an offer for it, or any other parts of the engine, then contact ‘Ash’ (9-5...
  4. Transalp
    Hi, my TA650 (80000km on the clock) has high oil consumption on the higway. When I returned from France (1500km, at 120km/h, 3 panniers) it used 0,7l. It seems a lot to me. My theory is too high oil temperature. It was really hot (engine case), compare to brothers Tiger 1050...So I am...
  5. Transalp
    Hi All Maybe a stupid question im a new rider just bought myself a TA650 love it but the gear selector needs adjusting as its too low for me... ive looked online without much joy as to how to adjust? can anyone help me please? Thank you in advance
  6. Transalp
    I have a TA650 and have owned TAs most of the time since the early 90s because they suit me and they do most things well. I have not ridden the new CB500X but the impresson from the posts on many websites is they appear to be the new Transalp relative to the new Africa. They appear to be capable...
  7. For Sale / Wanted
    Hi everyone, from a newbie, that sounds ridiculous considering l'm 67, (how about old newbie) anyway, l've just sold my NX 650, and bought a 650 TA, mainly because the TA will be virtually vibration free compared to the dominator, but l need to raise the seat height, I'm 6' 5'', so if anyone has...
  8. Transalp
    Hi All, Does anyone know if a TA600 rear wheel would fit a 2000 model TA650 any help Please. Thanks Viper
  9. For Sale / Wanted
    Hi Looking for rear wheel for my TA650 VY M/year 2000
  10. Transalp
    I have a 2001 TA650 which I have only had for a short time (I Love It already):happy7: Sorry about that. My question is when I set the clock to the right time for some reason it looses it when I park it up, and when I'm riding along the display go's and then when I stop it's back but not at the...
  11. Transalp
    Anyone know where I can pick up the genuine spark plug socket that can actually get to the two tricky plugs? Leant mine to someone and they have lost it :( Also the two nightmare plugs are they really much important to the bikes health? Never seen the point in two plugs per cylinder but...
  12. Transalp
    Seems to be the done thing of late ;) My TA650 passed it's MOT (WITH FLYING COLOURS)* Now I don't wish to complain, but, I was expecting at least a couple of advisories. The steering head bearings are getting a bit notchey, worst turning one way than the other and the rear wheel is very...
  13. For Sale / Wanted
    SOLD I have a set of XRV650 exhaust pipes (I think as they came with the XRV sumpguard). I was going to fit them on my TA650 but as I have lowered footrests they do not fit easily. I believe with standard footrests they just need a small dent to clear the footrest plate but the lowered ones...
  14. For Sale / Wanted
    SOLD A 1 piece AT sump guard in 'used' condition, not distorted or extra holes or cracks but quite a few small dents across front & underside, look at pictures! Was going to fit it on my TA650 but it would require trimming, which I did not want to do, to clear my lowered footrests and centre...
  15. Transalp
    I brought a set of AT headers, I think they are RD03 as they were with a 1 piece sumpguard. Are all AT headers the same? The AT pipes are slightly larger diameter (2mm) than the TA but flanges and head fitting appear to be the same. Hope diameter increase does not mean loss of bottom end...
  16. For Sale / Wanted
    Hi there All, I am looking for a cheap aluminium sump guard for my TA650. I will also take africa twin guards, but they have to be the type which bulges at the side (i think its RD04 or later) since these seem to fit. I am also looking for hand guards with an aluminium backbone..acerbis/bark...
  17. Transalp
    I am thinking of decating my TA650, before I cut and hack has anyone pictures of the inside of the cat. Does one cut the box off and plate the hole &/or cut & join the inlet and outlet pipes, or cut the inlet externally to the box and fabricate a complete link pipe to the silencer, the...
  18. Transalp
    Hello, i need an advice...if possible ASAP i can buy a shockabsorber for my 92' TA 600 made by Wilbers, almost new at a very good price. Mine is the original one and the bike is like a kangoroo from the behind so i am really into buying this yet...cause there is a yet...The shock is for the 650...
  19. For Sale / Wanted
    Guys, I am in the market for the following for my TA650... 1. bark busters hand guards or equivalent - 2. sump guard 3. headlight protector 4. pivot pegz or offroad pegs I am preparing the bike for doing some gentle green laning, but its greenlaning on a budget so if you have any bits and...
  20. Transalp
    Hi guys.. well my ta650 2004 with 55k on clock has just had the internal seal in the waterpump go..bearings and other seals fine..wish haynes told you when removing that all the engine oil need draining as well as water... the seal is the impellar one that cant be fixed so £300 for a new one...
1-20 of 55 Results
Top