I have removed my fuel tap off my CG125 tank, and the in the hole where the fuel tap goes, there seems to be a plastic insert (looks like a tube).
Can this be removed?
Need to get everything removed before i flush out tank.
Im getting a wheel respoked for my @ and want to use the best rim tape so I have looked on ebay and it looks very thin. I have some used pieces of rubber membrane I used to waterproof a roof and it was way more expensive than I thought and very good quality. Will this be better to use than £1.99...
I'm new here and have recently bought a 1997 Dominator in relatively original condition. I've just been sorting our a few bits before I'm going to strip it down and build a scrambler around it.
It has started making this loud tapping / clicking sound that can only be described as sounding...
i have lost fuel tap lever. new one is 15 plus delivery. does any one have other alternative?
I have read that someone made a tube connection to handelbar so can be easier switched when needed..
Assume gear lever was worn, purchased new one, shaft also worn :( would it be ok to weld for now? I assume it's engine out and strip etc ?
Any other ideas ?
Could I drill through pedal and shaft tap it then add grub screw ?
What options do I have
Sent from my iPhone using Tapatalk
Some wag has cut the line from the left fuel tap and drained my tank of my RD04 Africa Twin. Very nice of them.
I am thinking of taking the bike to my workshop and fixing it there.
Question1, If I turn the left fuel tap off can I run the bike on the right tap or do I need to replace the hose...
I have some troubles with my fuel lines on my RD04.
Wich INNER diameter should I use?
it seems the tank outpunt diameter is not the same as the input/output for the fuel pump and the inlet for the carburetor.
what diameter of tube should I use. I had never problems fitting those, but with...
Stator Cover few marks £35 posted within UK mainland
Gas tank with 2002 graphics £80 posted within UK mainland
Stock off-road wheels £600....collection only, come with new rear tyre and I think new front.
Gas tap £25 posted within UK mainland
Both my taps on the Xrv don't shut off !
So rather than buy expensive replacements or repair kits I thought about getting and fitting in some other in line shut off taps.
Firstly what diameter are the fuel pipes from the petcocks and does anyone have any other ideas or thoughts ...
Most of Henrietta is now back where it should be and looking tidy. Under the tank is just the fuel pipe to the pump but the parts diagram seems to show other hoses (parts 45, 46 & 48). there seem to be 2 short pipes under the tank (nr the fuel tap), one is 10.5mm and the other 5.5mm. Does anyone...
Hello lads. So today I found that my RD07 has a new trick up her sleeve. Cruising to a stop in first gear and then wanting to tap up into neutral is impossible. The gearlever feels well and truly welded into first gear. Cut the engine and she slides into N like butter. Am I missing something...
Just received my acerbis 23L tank the fitting seems easy even though there are no instructions but if someone has some that would help.
But what I would like to know is that do I need to reattach all the pipes of the original tank there is 3 in total 1 breather small in size 1 large...
Heyy all I'm having difficulty finding a fuel tap for my bike not sure what it looks like as has been previously snapped off mine haha I know the hole is 18mm so would I be able to get a universal fuel tap or does is have to be specific?
I want to replace the petcock and fuel tap on my AT. Previous owner repaired with a nail and some duct tape. Does anybody know whether another Honda model will fit an AT or is it best to buy an original part. They are quite expensive here in South Africa, but the tap is getting difficult...