Honda XRV Forum banner
tappits
1-6 of 6 Results
  1. Other Honda
    I have a 2001 XLR125RW and I've tried to find a manual with no success. I've got the bike running but its not starting up well and the tappits sound noisy. Does anyone know the valve clearances for this bike? And the spark plug gap? Need these urgent as I'm supposed to be doing my cbt on this...
  2. Dominator / FMX
    After about 2 months of essential and non essensial work the domminatrix is back up and running.carbs,cleaned.tappits set,exhausts respayed new air filter and generally cleaned and painted loads of bits.she is,running really well and it seems that all the hard work was worth it.want some nice...
  3. XR
    Hi! Just bought an XR400 2002 £1,800 (Got stung) I know they are hard to start but this one takes the micky. Any whilst riding home and holding the trottle at 40 or 50mph the power drops, then I need to wind the throttle open again. I suspected the carb. So I got home, checked the crab out...
  4. Recommended Dealers/Service Providers/Campsites
    Hi all I need to get Ben's clutch sorted out and rear brake caliper! (btw for those that don't know - Ben is my RD03 650 Africa Twin!!). Also he seems to lose power when leaning around corners and I'm suspecting the tappits are noisier than I recall!:rolleyes: My question then is.... does...
  5. Transalp
    Got home at 05:30 this morning and dumped the oil and removed the filter. Replaced the filter and oil then set about changing the coolant, removed the fairing and seat and tank. Drained the coolant, decided to changed the top spark plugs as I only ordered two:sign6: thought as I am this close I...
  6. Dominator / FMX
    Hi just picked up a 89 Dominator,few bits not sure about. It rattles slightly when cold but goes when hot,sounds like tappits? Starter makes a weird noise ,but turns over ok. Gears feel a bit clonky,goes in & out is this normal. Does the oil in frame lubricate cluch,or is there a seperate oil...
1-6 of 6 Results
Top