Just in case anyone else in the UK needs one of these parts and does not want to pay the stupid price of £32 :disgust: ........ (these are only $15 in the states)
I just made & fitted today, seems OK. Cost me about £2 & 1/2hr effort. (I bought a 25mm thick hard rubber dapping block on eBay)
Hello folks, me again :blob7::compress:
Does anybody maybe know the correct dimensions of the Dommie piston rings in STD setup?
(Inner diameter outer diameter and thickness of all three rings)
I am looking quite hard online for 2mm leather jackets but it seems the 1.1-1.4mm range is mostly in fashion.
Anyone knows of a good brand that makes leather thickness higher than that range please?
I'm looking at getting some new rings for the AT, but I see 3 sets available. What is the number they're defined by? Is it the gap at the opening of the rings, or the thickness? And what's the practical difference between them?
Have a look...
Just got a decat pipe 2nd hand but the guy didn't send the gasket sleeves for fitting into the headers,
The original Honda ones are only about 3mm thick washer type where as the pics of the Leo Vincent ones are more like a tube so anyone know where I can get some?
I nearly bought a Transalp when they first came out. But didn't. Loved the look of it though. Now, I've just bought a 2004 Transalp. Question: does old style bodywork from the original fit a 2004 or has the frame changed as well as the bodywork on the later ones. It's not such a stupid question...
hi can anybody tell me what shell bearings i need ? my old rods are marked A2. I have two new (secondhand ) con rods that have been cleaned and the markings are vauge i think i can make out an A on one and the lower half of a two on the other?
my crankshaft is marked with A ................ 2...
Hi all, not sure if Chatter is the right place but ho hum, you never know might get shifted.
Anyone got any experiences or recommendations for the thick plastic you get to put on the wear points on the bikes frame.
Kawasaki don't appear to spend too much on a thick layer of paint so when I've...
Hi everyone i think the origin of this Medal/award is in Recognition of Sporting excellence awarded to either German Troops or German People.My Father brought it back with him after getting liberated from a POW Camp in Poland.The Medal/Award is 50mm Diameter and 3mm thick.Does anyone know any...
sorry if i'm thick but I just been trying to upload some pics and cant seem to do it! :(
told you I was stupid :D
anyhows... I pressed the image button but it only giving me the option to enter url but the photos are on a memory card.. I tried copy and paste but it wont paste neither..
I have a 1982 xr 500 project and the motor runs fine but its missing the clutch push rod,i am guessing that one from an xl500 would be the same? Anybody know if it would. Has one for sale or can measure one up length and thickness and I will get one made up . Thanks in advance
OK... on the R45
I have in my possession a new oil filter, big o-ring, shim and paper gasket
I've dropped the dropped the oil and removed the old filter being really careful to note what came out and what order. Behind the three bolt cover is a big o-ring and the filter. No shim or paper...
I used to like old Patrick for his wacky looks, thick accent , waistband up at his neck -and the monocle.:D He's been around so long he was like part of the furniture, spying through his garden telescope and generally being an eccentric which is good -we need more of them around. But.
Hi guys, in the **** a little. Stripping the clutch and i've found there is no thrust washer at the bottom of the basket, urgently require the thickness and outer dia of the washer if anyone knows?? Not to concerned with the internal dia as i'm thinking all it has to do is clear the shaft.
Merry Christmas and a Happy New Year.
I'm looking fo a small piece of aluminiun tube/bar, it needs to be 2.5" OD and if tube a wall thickness of around 5mm, I only need around 3" length to make a carb spacer, tried a lot of stockists and they want to sell me great big lengths.