Honda XRV Forum banner

thing

  1. a question on the site/store XR650R.Co.Uk

    XR
    hello from Italy, I need to know if the store XR650R.Co.Uk is still active today. Someone here in Italy has tell me that XR650R.Co.Uk is gone out of business, is this true? Hope smeone can help me to understand how is the thing! THANKS!
  2. Africa Twin RD03 Conversion Value

    Africa Twin
    Hello all, I am in the middle of converting my US-spec Transalp to an Africa Twin RD03. The frame and most parts carry over to both models. I am using all original Africa Twin parts when possible and upgrade parts elsewhere. All parts are being powder coated or refurbished. In the end...
  3. VIN/Tire Pressure/Model Year Sticker Location?

    Dominator / FMX
    In the box of parts that came with the '89 NX650 that I just bought, I found the metal plate/sticker that shows the VIN, tire pressure info, model year, etc. Where does this thing belong on the bike? I want to glue it back on, but I can't find it on parts diagrams.
  4. RD07a Fuel pump

    Africa Twin
    Hi all, I am having a few problems with the AT, cuts out noot long after start up when riding cold, leave it 19 minutes and it starts again with no more problems!! I have serviced it, changed plugs, fuel filter, fuel lines etc but still happening. only thing left is the fuel pump, it runs with...
  5. Steering bearing replacement advice needed

    Africa Twin
    Has anyone here replaced their steering head bearings? If so...how did you remove the bearing 'race' that is on the lower yoke? This thing... The internet suggests - using a chisel - using an angle grinder - using a dremel - using two screwdrivers - using some sort of special tool so...how...
  6. Steering bearing replacement advice needed

    Transalp
    Has anyone here replaced their steering head bearings? If so...how did you remove the bearing 'race' that is on the lower yoke? This thing... The internet suggests - using a chisel - using an angle grinder - using a dremel - using two screwdrivers - using some sort of special tool so...how...
  7. Ive got a 97 AT to sell ,any idea how to value it ?

    Africa Twin
    been sat in garage for years , thing is i dont believe il ride her again , bugger !
  8. 1998 XR250R side stand spring

    XR
    hi, i managed to leave my side stand spring in a forest in devon :/ a genuine honda spring i found for 4euros but with 18euro postage !! so im opting for a universal spring, the only thing is i dont know what length to go for. between the pin on the stand and pin on frame is about 170mm but...
  9. Dommie custom in Bike mag

    Dominator / FMX
    For those that like that kind of thing, the current issue of Bike magazine has a feature on a French-made custom from a Dommie donor bike. July 2019 edition, page 20. The engine, bash plate and front half of the frame look familiar, but that’s about all! Sent from my iPhone using Tapatalk
  10. Italian import vin??

    Transalp
    Ok I've found a frame with v5 and some other parts. It's been in a shed for some years in a dismantled state. According to the owner it was a one owner grey import which is verified by the v5. It says first registered to an independent importer. It's an Italian factory model but can someone...
  11. Xr oversize fuel tank

    XR
    Looking for oversize tank for Honda xr 250 ,600 any thing considered thanks Dave
  12. Exhaust Help

    Dominator / FMX
    Morning All, I was wondering if someone could measure the internal diameter of the tail pipe exit on the dominator exhaust for me please? I got my domi scrambler running at the weekend but it's ear bleed loud so I want to design a baffle to go in the cans I'm running. From reading other posts...
  13. My FMX tracker project

    Dominator / FMX
    Thought I’d post a couple of pictures of progress so far. I picked up a tatty FMX in March 18 and since the have been slowly rebuilding it in the style of a tracker / Scrambler hybrid. Still lots of tidying to do but the basics are now done and I like the direction it’s going. It’s all my...
  14. Exhasut makes loud pop/bang after piston change and setting cam timing.

    Mechanical Advice
    Bike wont start! Exhasut makes loud bang after piston change and setting cam timing. I got a stomp juicebox 3 110cc off my friend. He told me he was riding it and the bike slowed down and when he turned it off it wouldn't turn back on. I knew a bit about bikes and after searching forums and...
  15. extra long throttle cable

    Africa Twin
    I have 25mm handlebar risers on my @ and have just fitted starbars. Thing is, the bars are a tad longer than standard bars and on full lock the engine revs due to the length of the throttle cables not being enough. I like the new bars and also like the risers, so is there a longer throttle cable...
  16. Where does this bracket go ??

    Africa Twin Technical Specs
    After all the parts I have taken off and put back on I am stuck with this little bracket. I did put a label on it saying sprocket cover, but I can't see in any place it will fit. I'm pretty sure it's somewhere near the drive sprocket cover but as I've said ?? I've also looked at some different...
  17. 2011 XL700V Transalp and stuttering at low revs

    Transalp
    Hi, I'm the proud owner of a 2011 Honda XL700V Transalp and am still getting used to riding it. One thing that I'm not sure if it's normal or not though is that the bike stutters (like it's about to stall) between 1500 and 2000 revs consistently. This makes commuting in Central London somewhat...
  18. Sore backside ?

    Transalp
    Hi folks just back from my first long distance tour 2500 miles around the coast of Ireland one thing that has left an impression on me is the discomfort I have been in due to the shape of the seat on my 650 Transalp. Does anyone know of a replacement seat similar to the Africa Twin Enduro style...
  19. Seating options...

    Africa Twin
    Poxy seat on the rd07 is the most uncomfortable thing I've ever had the displeasure of sitting on, soooo what are my options? Wait for one to come up secondhand? Spend a fortune on Corbin or top sellerie? Has anyone used the polish lad on eBay that charges 90 quid? I've already got an...
  20. XR 125 LED 3P connector

    XR
    Hello Has anyone changed their indicators to LED ones and what is the relay that will work properly ie proper 'flash' rate ...I notice it's a 3P on the XR L6 and that there are only 2 pins wired in ones I've seen on ebay? I'm not very clever with electrics,but is this the kind of thing I should...
Top