Honda XRV Forum banner
threadlock
1-7 of 7 Results
  1. Varadero
    Gear pedal pivot bolt sheered this morn, on the M60 - which was nice! I changed gear by hand and limped the last couple of miles Anyway, Hunts had one and every bolt on the hanger cracked immediately making removal of the snapped stud a doddle. It literally turned itself out, drilling from...
  2. Transalp
    Hi guys... so I changed the rear brake pads on the alp today...the pad pin cover (the little cap like screw which takes a slot head screwdriver) was stuck in place...I loosened it with an impact screwdriver no problem and the pad pin unscrewed fine without any problems....However I am mindful...
  3. Dominator / FMX
    hi all. white bi*ch winter murdered mr. spring in Lithuania i am still in preparations for new season :/ in late autumn had strange thing - my bike suddently lost power and i barely made home. when took off head cover found that i am a headless fool... i did not apply threadlock to cam spocket...
  4. Africa Twin
    As has been mentioned on here before, the studs in the righthand fork leg lower are not replaceable if you take everything that Honda say as the truth. After I had a new wheel built a few weeks ago I had a brainwave in that it'd be good idea to torque up the axle clamp plate pinch bolts...
  5. Africa Twin
    Forgot to post these awhile back, so as the tank was off today. After I sized it up on the normal? right hand side, hanging from the fairing bracket, i thought it was too close for comfort to the forks when turning (envisaged it slipping folllowed by horror story) so after abit of pondering...
  6. Transalp
    In brief, this is the problem that I was trying to cure: Gearbox output shaft splines stripped as a result, I suspect, of the sprocket being fitted the wrong way around for long enough to cause wear due to uneven loading. Bike unable to move under its own power. The accepted solutions to...
  7. Africa Twin
    Okay! Using Threadlock as a substitute for the missing torque settings in the Haynes 'Africa Twin" manual is not giving me peace of mind! Just recently, while replacing the front brake pads of my @ I grabbed the manual and searched for the Front Brake Caliper mounting bolts torque setting. I...
1-7 of 7 Results
Top