Hello guys, I am Nikola from Bosnia and I am in the process of restoring old AT 650 and the job is nearly done so I've decided to share this with one of the biggest Africa Twin cummunities. For now I will share with you link to a Serbian moto-forum,BJBIKERS, where I post everything I do on my...

Hello All. This is my first post on this forum so i would like to introduce myself. Coming from a Fazer 600 to a Transalp 700 2013 and I am excited to hear all your experiences and knowledge and share my ones as much. I am living in Ireland for the past 17 years and been riding only for the past...

Hi all, it's been a while, hope you are all well and loving your new / old ATs :D Sold mine, didn't want to but ironically the difference from an older GS funded our ADV to Spain to hunt down some of those Africa Twin film locations from the original marketing videos. Can't make this up if you...

Hi lads, has anyone tried these fuel pumps on ebay? https://www.ebay.ie/itm/FOR-HONDA-XL1000-XL1000V-XL-1000-V-VARADERO-1998-2013-FUEL-PUMP-OUTSIDE-TANK/222986828731?hash=item33eb0cfbbb:g:COYAAOSwl9BWJ3Lx Whats the verdict? worth a try? thanks in advance:o:thumb:

So how do you go about choosing a proper size fuse? I received my new 3 circuit setup and would like to get it installed now. One line is going to my gps and another to the rear trunk. is there a rule of thumb to use for figuring things out? Also for the switched circuits can I use a rear turn...

Hi all, I’m new to the forums and would just like to say hello to you all. I have just got back into biking again after nearly 20 years and it’s great to be back on the saddle again :thumb: Got myself a 2001 Honda XL650V Transalp and really enjoying it. Great forum and lots of good info...

Oh yes. Deano's new shiney Africa Twin DCT would not start with a flat battery and you cant bump them (I think??) so the jump leads out and my old AT saved the day! :thumb:

Morning All, Has anyone had a go at fitting just a top yoke from any of the Honda family? I'm wondering if an XR600 or an XR650L may fit the dommi? I know the ignition switch could be an issue but its more does it fit the forks and stem ok? Reason I ask is I am trying to find a yoke with...

There’s a small amount of storage space under the pillion seat but access requires a spanner to remove two 10 mm screws. This spanner is in the toolbox by the battery which in turn needs the Allen key under the rider seat. To make the pillion seat quicker to remove there are two easy...

Hi peeps, Has anyone had experience of registering an RD03 in the UK or any bike for that matter ? I have recently moved back from France and I have brought my trusty steed with me, now im in the process of trudging through the paperwork... The DVLA are asking for a certificate of conformity...

Hi folks...first post on here, it's probably been done to death so apologies in advance: As a first-time TA owner, I'm after some crash bars and pannier racks (plus panniers eventually) I've seen the usual suspects on Ebay, (Givi, Heed, Hepco & Becker, SW motech) and a couple of eastern...

This one belongs to my friend. Max weight is 22lbs on that rack (so says the sticker). He had 17lbs of "survial tools and equipement". He went for medium off-roading. Nothing hard. Did a small jump over a ridge and... crack !!! Would you bring less for a day of off-roading ?

Hi all, I eventually bought the Batzen Screen Adjuster for the AT CRF1000L :D Seemed a good opportunity for another video...... Have a laugh, might have been slightly hung-over :thumb: Oh, mic went dodgy in places....

Hi all, Anyone doing the K2 in Kielder this year? There's not that much info on-line but sounds fun :thumb: Wondering if anyone has done this before or is riding it this year????? Good opportunity to get your bike dirty and not get kicked-off the trails!?? Dirtbike-Action

Howzit from SA! Im on my second Dominator rebuild - this time a '95 Italian built model. The rear shock (stock) seems fine, but the spring was crap. The length was well within spec, so I sent it off to be re-tempered. I did this before with my last Dommie, and it worked a treat. Now - when...

Hi there I've just put on an arrow exhaust system and I'm wondering what I can do in the carb when this system is on it. Has anyone done this to their exhaust and carb. I'm not overly confident of not ballsing it up.. Where should I be looking as a starting point? Keihin PDN 2B [After 0'3] Main...

I've been thinking about relocating the fuel pump (Facet), anyone any ideas or pictures if they've done it? I'm hoping to relocate it higher up in behind the main fairing somewhere. I did look into fitting it by the carbs, but I think it might be too large. Thanks in advance :thumb:

Hi all, As the birthday boy :D Family got together and got me a Dainese D-Explorer jacket :thumb: Having found some pants that fit me (oh, at last) Ive noticed I am slipping all over the shop on my bike seat :( Ive never had fabric gear, always leather so it was never an issue, but really...

Hi all, Looks like we're now off to Switzerland in 2016 :D If any one has any advice, hotel recommendations and the best passes to ride I'd appreciate any help ! The plan is to ride to a single hotel and use that as a base to explore the passes. Cheers all :thumb: