Help please! I've set myself the task of replacing my rear brake pads but I've fallen at the first hurdle.
I can't for the life of me see how to get the pad retaining pin out. I can't see any threads / hex heads like on my other bikes. I can just about see a tiny hole where I guess an r-clip...
My 700 has always run a bit hot. I am thinking about swapping those 2 tiny radiators for a single large one. My question is would it be a simple swap or is there anything there to stop me doing it, some technical reason? I guess radiators are pretty simple but would like to hear from someone who...
I'm Marco from Belgium. I have an RD04 from 1990. It's a great bike, but has had some bad owners that didn't maintain it. :(
I have replaced the rubber inlet seals, valve cover seals, fuel hoses, blablabla... =)
Now i am left with one part: a screw, a tiny washer and something on...
I've found a nice NX250, 1988 near me. Tempting even with the tiny wheels (16 inch). Is there a forum where convos about it might be found? It's also sold worldwide as the AX-1 and listed occasionally in the US as a Dominator... and I'm in the US. Thanks for any leads... t
Ok guys tiny moan with my xl600v seating position. May just be me but when in the saddle I feel that I have to keep shuffling back up the seat. Also the slight forward sliding puts pressure on my old thumbs. I know I'm a wuss. Now my question is are there any after market seats with slight...
In comparison to gold, this could be legal tender.https://www.dropbox.com/s/gnoufv43jsc1rq2/2015-12-12%2012.52.00.jpg?dl=0 It's more expensive, at £2.75 each.:mad:
Honda are ridiculous for their prices for small items. They wanted £2.80 for one the tiny copper washer at the bottom of the front...
The acrylic screen on my RD 07 Tripmaster is discoloured, and shows signs of tiny cracks. As a result I am unable to read the Tripmaster clearly whilst I am riding. Is there anyway I can polish the screen to get rid of the scratches?
Honda XRV 750 RD 07
Honda XLV 700B
We have a tiny little upholsterers in Ross, and I got talking to Terry who works there and asked if they could do a bike seat.
Not bad for fifty quid, he said he would rather not refoam it but leave it as original.
No complaints here.
He would rather not have his details posted all over the...
Bought off vader, used with a tiny pin hole in porch, comes with groundsheet and a load of (bent) pegs (!) used for Italy trip - not tall enough for me. Easy to put up and take down. £40? Collection from hastings or London
Wanted left hand switch cluster for At RD07.
The dip/main switch is sticking horribly, I have eased it with WD40 and three in one, but is still sticking in the main beam position. Not too clever.
I am wary of dismantilign it as I have horrible memories of a handa switch going 'Sp'dang' and...
Ok so 99.999% done.
1 - have find 2 14mm fine thread bolts longer for calliper as ones have arebit short.
2 - grind caliper tiny bitin 1 area
3 - then sort digi display as rpm not showing up
4 - Buy new shock
I'm after the smallest, legal, silencer/end can which I could use on my RD03.
Have read the may threads about exhausts and I'm thinking that if I get a link pipe made up I could just use any suitable end can. What I'm after is something durable, stainless or titanium, legal and as small as...
This morning got my bike out for a trundle around and noticed exhaust steam coming from the very bottom of the can near the join.
Further inspection there is a tiny hole but it looks perfectly round (about 2-3 mm) and looks as though it's always been there?
I'm prepared to feel stupid once...