Honda XRV Forum banner
tooth
1-20 of 62 Results
  1. Transalp
    I have these two. Free to collect from North London, or £10 posted they fit a 650 Transalp, and maybe a 600/700 too? (i'm not sure) - standard 48 tooth rear sprocket - 47 tooth rear sprocket (lowers the revs a little for motorway riding) both only lightly used as per these...
  2. Africa Twin
    Hi all, Just asking if anybody has experience with JT’s rubber front sprocket on the XRV? We all know why many use the OE Honda front sprocket but since they cost about €30-35 and the JT cost about €15-20 it could be just as good.. Just for reference the JT sprocket is JTF296-16RB. other...
  3. Africa Twin
    Hi All. Long time no post. I do hope you're all well. My rear shock is getting a bit long in the tooth and I want to start looking to replace it. My bike is 100% road going these days so I would not be against a road set up rear shock, so does anyone know what fits? I know there are lots of...
  4. XR
    Hi, ..... I am looking for a bit of clarification please re: my new drive sprocket. The Honda manual (& YouTube vids) all state ..... install with the tooth number stamped on the socket, facing out. (this was the case on the one I just took out) But the new Renthal sprocket I have, appears...
  5. Africa Twin
    My current sprocket setup is -1 front and +3 in the rear. I like this, but I'd like to get better mileage on the road and I want an OEM 16T front for reduced wear on the shaft. Thinking of changing my chain and go to just +1 in the rear or should I go with the stock 46 tooth rear sprocket?
  6. Transalp
    used on the bike for about 50 miles it's 47 tooth. ie one less tooth than the standard 48 tooth. ie. revs will be slightly lower in the cruise £15 posted (it's currently in my dad's shed so wont be able to post it for a few weeks)
  7. Africa Twin
    Split the cases on 97 XRV750 but now during assembly the rear cylinder cam shaft sprocket timing marks slightly off...could it be off one tooth on lower sprocket, any suggestions? As you can see in attached photo the left side horizontal mark is about a half or quarter tooth below the right...
  8. Dominator / FMX
    I currently have a 1990 ish motor (without kickstart) that is in need of a rebuild. I have found a good 1988 motor.I believe the early motors had different splines on the gearbox shaft. I am asking because I currently have a 14 tooth sprocket fitted because the motor is in a sidecar that I...
  9. Transalp
    Just changed both sprockets today but the front one (+1 tooth) is slacker on the shaft that the one i took off. As anyone will know who has changed a sprocket the bracket with two bolts to retain the sprocket has to align in the gap on the spline as they do not line up otherwise. Anyone suffered...
  10. Transalp
    I have got a spare brand new DID 15 tooth front sprocket to fit a all model transalps DID part number 20507 £10 posted in the UK
  11. Varadero
    Hi mates, its true the blue ones are faster :-) , but Im planing to change the rear sprocket to a 42 tooth for better fuel consumption on my 2002 Dero. Anyone has experience with this setup (16/42) for regular and touring ride? cheers
  12. Africa Twin
    Will I lose many rpm's when cruising on freeways dropping down to a 47 tooth sprocket from a 49 on the bike . I've been looking on site and not finding much about rpm drop. I was hoping for a 45 tooth myself but cannot find one . Also will I need to shorten chain at all for those who have done...
  13. Transalp
    Can anyone tell me the oem honda sprocket, 16 tooth that replaces the stock 15 tooth, cant find it in my searches, thanks.
  14. Transalp
    Hi, just got a replacement chain and sprocket kit from an online Honda dealer, it is a 15 tooth front 47 rear, from what I can find out online think it should be 16/48 I wonder if the 15/47 will make much difference? they are JT sprockets,gold X ring chain. thanks.
  15. For Sale / Wanted
    I have just sold my CRF and have available FMF Q4 slip on exhaust ( no header) - used for 75 miles only , as new and unmarked ,comes with original packaging and invoice for £249 . Will accept £185 for quick sale .. Really improves the bike AXP full wraparound sump guard , cost new £120 will...
  16. Africa Twin
    I have standard gearing on my RD03, & I'm going to ride the 1000+ miles to the Elefantentreffen at the end of January, which would be a good compromise gearing wise, 1 tooth less or 2 teeth less? Only changing the rear sprocket as I have a genuine Honda one on the front & I wouldn't change that...
  17. Africa Twin
    Hi guys so I have slighlty bigger jets on my rd07a and the produro pipe (love the vtwin sound with that pipe ) Anyway I have the standard 45 tooth sproket on the rear and the oem one infront, got a long trip planned and need to economise on fuel so whats the best crusing RPM's for this that...
  18. XR
    These have been in the for sale section but just thougth I'd post them here before they go on ebay. Front and rear wheels complete with discs, nearly new 45 tooth sprocket and decent Michelin T63 tyres. £150 for the lot or may sell separately. plus P & P. or collect from Manchester. PM me or...
  19. For Sale / Wanted
    Inner bags for 3 box luggage (panniers and top box). Grey with Honda logo and carrying handles. £50 DID gold chain set (chain plus standard rear sprocket. Gearbox sprocket is plus one tooth). New. £85 Heavy Duty inner tubes, f&r, £25 the pair. All prices plus postage or pick up from...
  20. Transalp
    Am about to replace my 15 tooth gbox sprocket with a 16 tooth. The 16 is noticeably larger of course. I will be replacing the chain and rear sprocket (47 tooth). Any issues I need to be aware of? Will a regular replacement chain fit?
1-20 of 62 Results
Top