Honda XRV Forum banner

tube

  1. XR400 Exhaust Diffuser/baffle tube and Duct/Snorkel for airbox

    XR
    I'm trying to return my XR400 to standard specs. As it seems that many XR owners remove these items, I'm hoping that someone has a diffuser and snorkel for sale! If you do, please send me a message. Thanks.
  2. CG125 Tank

    Mechanical Advice
    I have removed my fuel tap off my CG125 tank, and the in the hole where the fuel tap goes, there seems to be a plastic insert (looks like a tube). Can this be removed? Need to get everything removed before i flush out tank.
  3. Wanted: NX650 Airbox Snorkel

    For Sale / Wanted
    The part number and description are 17253-MAN-600 TUBE,AIR CLEANER CONNECTING Mines got old, hard, and has a crack now. Cant seem to find any online.
  4. Clutch cable change

    Transalp
    TA 650 (probably applies to all models though) For anyone thinking of doing this..on the 650 its a bit of a job. The Haynes manual says you just "attach the lower end of the new cable to the upper end of the old cable, and just pull the cable through", yeah, right. What it fails to mention...
  5. coolant tube o ring

    Transalp
    Hi all, my TA 700 as a coolant drip, from the tube between the cylinders, as anyone got any tips on changing the O rings !!
  6. hand gaurds for the 2005 traqnsalp 650?

    Transalp
    Can anyone recommend hand guards for the above bike. Snapped my hand brake lever ( but managed to manufacture a mock-up for now) Looking at the twist grip there doesn't seem to be provisions for fixing a two point gaurd, which I would prefer (more solid) It seems to be a closed off tube...
  7. Frame blanking plugs

    Africa Twin
    Just a little tip if your looking for a new cap for the swing arm bolt i found these work great. Just had to cut about 6mm off the length for it to fit flush...
  8. KTM fork conversion fitting Rugged roads adaptor help

    Africa Twin
    Does anyone know how to remove the lower triple clamp from a set of ktm 950 forks? I have the bearings off but the steering tube is stuck solid and my finger cant't take another whack with the lump hammer. Also when I get this off how do I fit the adaptor back in? Thanks
  9. Clutch rattle ..

    Africa Twin
    Clutch rattle is excessive it does quieten when i pull in lever but its excessive and i need to sort it !Now i am still not ready to pull it apart so i still dont know whether its just worn plates or more serious ..I was looking on you tube and i found a guy called [email protected] who can...
  10. Tool tube cap

    Accessories
    Anyone got a spare cap for a tool tube? Bike fell over on way to a bike rally and the RHS cap smashed into three pieces Thanks for any help John Sent from my GT-I9505 using Tapatalk
  11. Time for a service

    Dominator / FMX
    Quick question folks, i am about to do an oil and filter change to my 89 and cannot remember if it was sump first then downtube or vice versa. It was only four months ago too :( and did i, do i dip the filter in fresh oil or put in dry ? Bloody hell i'm doting :rolleyes:
  12. fuel tap lever

    Africa Twin
    i have lost fuel tap lever. new one is 15 plus delivery. does any one have other alternative? I have read that someone made a tube connection to handelbar so can be easier switched when needed.. thanks
  13. YACO (Yet another Chain Oiler)

    Bodgers Corner
    I wanted to get rid of the sticky spray lube for the chain and intended to build my own chain oiler.<br> My main objectives were: low tech, independent from motor vacuum or electricity/electronics. full manual control of the amount of oil being applied, depending on road or weather conditions...
  14. Wanted: Rear wheel

    For Sale / Wanted
    Looking for a rear wheel for my 1996 rd07 africa twin......its an alloy wheel with spokes mine is rotting near the tube hole .... Cash waiting.....thanks for looking...kevsky.. I live in the north east of england..
  15. where should the cam cover breather route too?

    Dominator / FMX
    As above my dominator engine has a breather tube on the cam cover but it is open to the air,this seems wrong where did it go originally? Idont use the airbox from a dominator and wonder how it was connected
  16. removing heated grips

    Transalp
    I want to change the handlebars on my xl700 as the bend on the standard bars does not suit me. the throttle side is easy as it comes of with the tube.the clutch side has to come off to remove the clutch perch. it is very well glued !! any tips on removal without destroying it ? not sure if...
  17. Bored with your Varadero? Enter "Project Varatrackerstorm or Firetrackerdero"

    Varadero
    Bored with your Varadero? Enter "Project Varatrackerstorm or Firetrackerdero" I’ve been thinking of this project since coming across a picture of a VTR engined tracker years ago. To me it looks spot on, everything fits just right. I’ve been studying the picture/screen background for...
  18. British AT Riders in Sardinia - Thank you very much!!

    Africa Twin
    On June, 4th, 2017, I had a big problem with the front tire in the middle of nowhere in Sardinia (Italy) on my AT RD 07a. Unfortunatly it was Sunday and I had no spare tube on board. So it was great luck, when 4 (or 5?) Englishmen on their AT's came along and stopped to help us. One of them even...
  19. Just brought a RD04

    Africa Twin
    As RD04 is the only variant of the XRV650/750 I have not owned and this was local it was worth a look and there was space in the garage as I sold a CX650ED.A 1992 with 25000 miles. Does anybody recognise it, I brought it from a guy near Ledbury that has had it since August 2014 and he brought...
  20. africa twin xrv750 rear innertube

    Africa Twin
    Can somebody recommend the best inner tube and size for an @ went on a stoney path and my last one nearly pulled the valve out I did find this one but not sure it will fit 17X450/510 michelin heavy duty from rugged roads
Top