Honda XRV Forum banner
1-15 of 15 Results
  1. How to.....
    Can anybody help with the setting up of the front end after fitting these units setting up of the unit ? (Turns down) oil level oil wieght Cheers agent
  2. Transalp
    Need help, please! Hello I have just had my 650 TA engine fully rebuilt, I put the bike back together over this weekend checking everything along the way with help from Haynes. The bike is just refusing to start, the engine turns over without any issues, fuel is getting to the carbs but for...
  3. Chatter
    Mr. Don Rosa turns 63 today. He is beside Carl Barks my favorite cartoonist.
  4. Africa Twin
    Just a bit of an update. I sent my carbs off to nrp to have the float valve looked at, turns out the carb body is while I am waiting for this to be repaired I went and bought an 05 plate pan European. I,ll post some pix when I pick it up. Sent from my SM-N9005 using Tapatalk
  5. Chatter
    BBC News - How one man turns annoying cold calls into cash :D Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!
  6. Chatter
    We've hired our new Troll finder general English boxer Curtis Woodhouse turns up on the doorstep of his Twitter troll | Sport |
  7. Chatter
    No one falling off and no u-turns, so cannot be anyone on here. :D dirty toys - YouTube Maybe I should have put his in the Ride Reports and Pictures forum? Edit: Found this on the RevCounter forum in a post about supporting the TRF on a Peak District protest ride on the 25th November...
  8. Varadero
    Hi Guys, Just bought a 2006 varadero 1000, its been standing for a while. Previous owner said its been standing for 2 years, I have drained the fuel and replaced with fresh fuel. Replaced the battery She won't start, turns over nicely I have pulled one of the plugs, and theres no spark...
  9. Mechanical Advice
    Hi All, were talking jets here, now I'm running rich on my old XJ and the pilot jets appear clear and are 1.5 turns out as per spec, now I want to try and reduce the richness of the mixture, so do I tighten them up or loosen them (told you it was basic :toothy10: )
  10. Dominator / FMX
    I have my carbs off at the moment and we all know how hard it is to reach the slow jet screw so what is a good average number of turns out from fully screwed in.I ain't arsed if I'm out by 1/4 turn or so.any ideas just a rough estimate as I can't reach it when the carb is on.cheers folks.
  11. Africa Twin
    So my RD03 speedo isn't working. Cable turns, magnet turns inside the housing, but the speedo cup (the aluminum bowl that is turned by the magnet) does not turn. If I use my drill, I can get the needle moving easily. Is it possible that my speedo cable isn't turning fast enough? Any suggestions?
  12. Chatter
    YouTube - Man invents machine to convert plastic into oil
  13. Bodgers Corner
    Hi Well my new bike is great but me and the wife had to take turns at breating in, The top box was leanning forward and a little to far forward I moved it back a bit but it was still leaning forward So i made a two brackets to move it further back and alter the angle. And...
  14. Chatter
    I'll bring the "Tag" for Wheals of steel, :rolleyes: if someone else will carry the rescue equipment.;):D:D:D.
  15. Ride Reports and Pictures
    A bit of a fright. I finally got ViewRanger installed onto the phone today, plus 640mb of ordnance survey maps of Ireland, the complete set, so to test it out I decided to take a bit of a spin towards the Burren in Co.Clare and use it to find some archeological sites. I found one or two...
1-15 of 15 Results