I am selling complete Pannier System from Hepco & Becker
Alu Sideboxes and upper AluBox With steel support mounting Side and upper carrier. All original HEPCO & BECKER, germany made.
Just to mention:
I just bought my new RD07a and imported from Germany. Bike has 45K km on the clock and was...
1976 honda xl 250 breather hose is in a "T" ...comes out of the crankcase,then T,s off hanging down by the swing arm,then the upper part that T,s off goes towards the front of the bike and i cant figure out where it attaches to it dont go on the air box or anything..does it just hang up somewhere??
Two years ago I had to remove my original exhaust from my RD03 because it was so badly corroded internally, I fitted a GPR Exhaust temporally until I could get my original restored.
In Rostov, Russia I met a custom bike & exhaust builder called Pasha, i sent the exhaust to him and 2 months...
I’ve seen these a few times over the years (mostly Riky Cross) and I’m considering hunting one down.
Any opinions or suggestions as to problems etc, availability or even if anyone has one knocking around?
I know there was a chrome one on fleabay a few months ago so I reckon the chances...
It's been a while since I posted as I've had a difficult year emotionally etc, but alas, I have a question of an XR400 nature.
I sprayed my valve cover earlier in the year and renewed the copper washers on the rocker pivot bolts as I had an oil weep, and when refitting, I used a new...
the first prototype of honda transalp
google translation from italian magazine
"It was 1985 when the Japanese engineers began to design the first prototype of what would have been the heir to the XVL750R, but with a completely different connotation. From an old press kit '97, emitted during...
How on earth are you meant to check the coolant level in the reserve tank?
I can see the upper and lower level marks on the outside but even with shining a strong torch through the tank from behind then I still can't see the level of the coolant inside.
You can't even look down through the...
As per the title :toothy9:
I have a few old, rusty bits of Transalp 600 for free (just pay the postage!)
-both pillion foot pegs
-fan (1 tab broken)
-lower fairing bracket
-upper yoke cable holder
-rear caliper bracket
-some other random gubbins
PM me if you want...
I am about to change the seals on the outlet water pipe due to water leakage. The seal itself looks different on the upper and lower side, Can anyone please tell me which direction the seal should be mounted.
See linked picture...
I have a pair of Transalp 600 fork legs going for free (just pay the postage or collect from Sheffield)
They have the mudguard studs stuck in the threads and one has been drilled through at some point, The internals and upper legs are all fine
PM me if interested or they go to the tip this...
Started the bike up after not using it for a few days and noticed a fuel leak on the left hand side.
Had to use the choke as normal and probably flooded it in the process.
At first it dripped enough to reach the floor but after a couple of mins it stopped, and then ran the bike for 15 mins...
All I need from the brakeline is the top steel block. Could come from another bike if the upper block is the same. Would buy several if available.
Also need ASAP the plastic inlet for the rear MC. Mine is broken at the neck. Part # 43503-MS8-006 and available on most Transalp...
Hello and Welcome.
Bough my Varadero July this year - still learn how to ride on this Horse :thumbup:
Unfortunately my bike has just been blown over in wind last week and has been damage.
Now I'm looking for a parts:
- Upper cowl, Honda part No: 64220MBTD10ZA
- Right fairing (in orange if...
Not technically XRV related, but thought it was worth posting anyway;) There IS an RD07 in there somewhere:D, and I was on my RT...
Harley Treffen Steyr 2013 - YouTube
Part 2 should be uploaded shortly; as soon as our slooooow internet connection allows:rolleyes:
BTW, Steyr is in upper...