Hi ive bought a 97 XR400R but upon inspection its got a broken valve which in turn has damaged the head too much for repair so im looking for a head preferably with valves/cam etc im in UK?
Thanks in advance.
I'm trying to return my XR400 to standard specs.
As it seems that many XR owners remove these items, I'm hoping that someone has a diffuser and snorkel for sale!
If you do, please send me a message. Thanks.
My 1994 RD07A is intermittently missing a beat at idle? It does need some carb work and is idleing a little high. But every once in a while it seems to have a little hiccup. There is a mechanical “click” sound then a miss in the RPMs. It’s just for an instant, then returns to normal. This...
I'd be interested to know what average running temperature you guys have. I went for a 150 mile ride yesterday and the temp reached 107. The road conditions were dry, 19C and an average speed 80-90, continuous for 2hrs or so. The temp gauge showed two marks below red so nowhere near boiling but...
Updated with resolution - XL250s indicator / turn signals staying on and not flashing
So the first problem has cropped up with the "new" XL. The indicators come on but do not flash so I suspect the flasher relay. Can anyone point me to the location of the relay please so I can do some...
i returned from a ride and noticed coolant coming out of small hole under water pump - i ordered some replacement seals but it has made no difference
is this fixable or has the shaft worn so therefore a good seal impossible
its a 35,000 miler 2001 model 650 TA
i have priced a replacement...
So, last time I had the carb apart I put in a 55 slow jet
As it turns out or seems atm a 55 is a little too much.
Seems to run ok but tickover still a bit erratic
Anyway, see if you can answer this
If I leave it ticking over and then switch off the fuel, it seems to smooth out and the tickover...
Hi there! I recently bought my first motorcyle, a 2008 transalp 700 and everytime I turn the ignition off the trip meter resets to 0. Trip , trip A and trip B they al reset. Don't know if it's normal or not. Any solutions for it? Also a noob question: how far up in the tank ca I topup with gas...
Strange one, when cruising home 30mph ish the bike seems to pulse like the throttle drops and then returns...
I have a suspicion of the clutch plates/friction plates but wanted a second opinion
Sent from my iPhone using Tapatalk
Hi all, my XL250S has started blowing the dip filament as soon as it is turned on. The main beam is fine with no issues.
When I checked with a multimeter I found the white wire has continuity to earth when the lights are switched on.
Has anyone any ideas what might be causing it or what to...
I have got most things working following my rebuild.
The only niggling thing I seem to be left with is that the engine will turn over and start when the start button switch is in the off position as well as the on position.
I must have a wire crossed over somewhere, but I have checked...
Hi, I'm a newcomer to Africa Twin's world. But i'm already loving it! Just bought a RD04 1990 and my first problem is that the turn signals are out. I assume it is the relay but... can't found it! Can anyone help?
Dear XRV Community,
My RD07A's anniversary was actually an excuse to return to Morocco.
I've always received kind and useful feedback from this forum, herewith sharing a few photos:
More can be found here: https://www.flickr.com/photos/[email protected]/albums
Happy and safe travels!
Does anybody know what differences (if any) there are between the SLR/FX and the FMX650 frames?
I know the SLR and FX are identical because I've turned an SLR into an FX and vice versa.
I'm interested in re-framing and older Vigor into an FMX650 to get a 2007 registration number.
I can see the...
I am after one of exhaust pipe shields. I looked it up on genuine Honda parts website where it comes up as PFKL 391531 but when I put this number in a search field on any Honda suppliers websites it doesn't return any results. Any ideas?
i'm having trouble splitting the bottom engine case on my 82 Xl500r,
i have to replace the kick start return spring, i have the engine upside down on the head & I've removed all the exterior screws, are there any internal screws i have to remove & what is the best way to separate them...
just installed this weekend manual cct on my Dero. The bike feels smoother at idle but rolling it seems a struggle a little or could be just placebo I dont know.
Should I turn off 1/4 on the mcct? will be need to put the engine at TDC?