Honda XRV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 500 Results
  1. Africa Twin
    Hi everyone! I recently remove the tank, airbox and carburators to change the main jets after changing to a more open exhaust. Know putting everything back I have a small problem... There is several fuel overflow or drain lines connected together to one main line that dumps excess fuel it...
  2. Africa Twin
    Hi All Has anybody got a heat shield for AT RD 07, the lower one that fits between the down pipes and the tail pipe, mines a bit battered and not happy with it, paint finish not an issue but must be quite straight and undamaged. Thanks Luke
  3. Transalp
    My ‘93 Transalp 600 was putting out 16 volts when I bought it a few months ago, and had had some meltdown in the distant last. It had an Electrexworld reg/rec on it. This morning I fitted a brand new aftermarket reg/rec to it. Wired it up, mounted it on a nice alloy heat sink plate of my own...
  4. Dominator / FMX
    Hello All, Please could somone measure the diameter of the FMX forks, the part that goes through the yokes, if possible I would also like to know the distance between the fork legs? Many thanks Jim
  5. General Honda XRV Discussions
    Im Looking for tank badges/logo for my CG125 tank. The spacing between screw mounting holes is 60mm, but all the badges i can find on fleabay are 67mm spacing between holes. Anyone bought any of these in the past for their CG125 tank with 60mm hole spacing?
  6. Dominator / FMX
    Im Looking for tank badges/logo for my CG125 tank. The spacing between screw mounting holes is 60mm, but all the badges i can find on fleabay are 67mm spacing between holes. Anyone bought any of these in the past for their CG125 tank with 60mm hole spacing?
  7. Member Classifieds
    Metal Mule Panniers for Sale. £350. Here we have a very nice pair of Metal Mule panniers. 2007 vintage and only used Half a dozen times in anger and for a few commutes or shopping trips in between. 38litre capacity each. Usual top quality MM panniers they don’t make them like this...
  8. Dominator / FMX
    I’m pretty sure all the above use the same basic frame, so the dimensions i’m after should be the same. Could someone with a Swing-Arm from one of these measure the front pivot width. That would be the outer width, i.e. the width required in the frame and also the inside width, i.e. the width...
  9. General Honda XRV Discussions
    Hi, Can anyone tell me or even better show me pictures of the differences between magneto rotors on an RD04, RD07 or transalp. The motor I bought a while ago only had one pulse coil and the magneto has eight little bumps near the edge. My motor has two pulse coils now as per the recesses in the...
  10. General Honda XRV Discussions
    Hi everyone A wee running problem I'm having at the moment with an 8 day Europe trip coming up in 10 days! So no pressure for me then! Put new battery in. No electrics - no Tripmaster display or turn over. Went through every circuit testing for continuity and spraying connections with...
  11. XR
    hi, i managed to leave my side stand spring in a forest in devon :/ a genuine honda spring i found for 4euros but with 18euro postage !! so im opting for a universal spring, the only thing is i dont know what length to go for. between the pin on the stand and pin on frame is about 170mm but...
  12. Transalp
    This applies to a 2011 model XL 700V. It has gone 53000 km. The problem started at about 50000 km. Is there anyone in Norway who has had the same symptoms? Or is it a Reodor Felgen out there who has some smart input? I posted this last year and got some tips, but without result. Have gone in and...
  13. New Member Introductions
    Hello everybody, My name is Stewart, I have just bought my first Africa Twin, a 1994 model. Just wanted to say hello and introduce myself. I am split between Mid Wales and Wiltshire at the moment, and I am looking to get away across to Germany in the next few weeks if work allows it! Thanks
  14. XR
    Direction Indicators Anybody fitted some ?? I tried to fit some today and failed Here's how All bolted up and connected to the existing colour coded bullet connectors in the loom Relay already in place and switchgear present & working Fired up the bike, both rear indicators worked when...
  15. Dominator / FMX
    Hi there, I have a 99' fx650 which I purchased to refurb and modify. I do not know how it ran before it was dismantled. It was only started. I have now rebuilt after refurb and I'm having trouble with engine hesitation with throttle open. I have put a larger main jet (175) as it has a custom...
  16. Transalp
    Hi all, my TA 700 as a coolant drip, from the tube between the cylinders, as anyone got any tips on changing the O rings !!
  17. Dominator / FMX
    Hi, My Dominator doesn't start when its oil temperature is between 60-80 C. I did the valve clearance but the problem didn't disappear. What could be the problem? Thanks
1-17 of 500 Results
Top