Hi how are ye all?
my 92 Transalp is idling at just over 2000 rpm.
recently took off carbs and cleaned thoroughly, all jets squirted out etc.
i did find a split that on each diaphragm.
after putting back on bike it was idling sweetly at 1500 rpm when warm for a couple of weeks.
I have been looking at the requirements for ULEZ bikes, and I cannot work out if my 600 will pass or not? I called Honda and they cannot give me a CoC for the bike (too old). Has anyone had the emissions (I think it is only the NoX output that they care about?!) tested? Am I able to get...
A set of Givi (I think!) crash bars that fit all 600 Transalps (according to EBay sellers)
They are used and have scratches and a small dent (filled)
They have been given a coat of black paint to preserve them.
They were removed from a 1992 TA (pictured) as I am making a naked TA.
Transalp 600 & XRV750 rear lift link SOLD
(Lift handle, silencer sold)
Transalp XL600V 88-94 & XRV750 RD03/4 Extended Rear Shock link for raised ride height.
I removed this lengthened link from a friends 1992 Transalp 600 as it was too tall for him. I now have that Transalp myself as he was...
Would anyone (preferably in the UK) have a straight headlamp/fairing sub frame they may be interested in selling? (Picture attached.)
Don't mind if it's rusty and in need of painting as long as it's not bent.
If so, please send me a message with how much you'd like for it posted to Surrey...
Please would somebody tell me if the four silver fixings you can see that hold the wind shield to the headlamp cowl are the correct ones for a 1999 XL600V?
Please see pictures.
They came with the bike when I bought it new but seem too big and shiny?
I have a red 1999 XL600V Transalp with a damaged headlamp cowl.
I have found a replacement cowl online which is red but I'm not sure the colour will match.
Does anyone know if there were different shades of red used on this model/year?
I've attached a picture of my bike.
It's quite an...
Greetings, I'm hoping someone can shed some light on a little bump in the road I've come across in my build. As the title states I've thrown a NT650 / Bros 650 / Hawk 650 motor in a Transalp frame and my issue is the front cylinder's exhaust port isn't allowing me to get the Hawk's front header...
WANTED 1995 Frame with v5. Please help me keep my old Transalp on the road I need another frame due to only being on TPF&T insurance lol
Complete bike or project considered but must be cheap. Sorry I missed out frame wanted but can't seem to alter title?
Hello. Has anyone tried the DCCDIP2 CDI in place of the DC-CDI CDIs? I'm wondering if it might be worth trying out on my RD03.
Link - www.ignitech.cz/en/vyrobky/bikes/honda/xl600v_transalp_1989-1995/xl600v_transalp_1989-1995.htm
Anyone got any info or advice on the acceptable or expected oil pump drive chain slack when installed (or length between links if removed) for a 1994 XL600V?
Engine casing off as we speak and im mid clutch replacement but when I look at the oil pump chain ,it just looks to me to be very loose...
Used but in good condition.
Bought it to replace the one on my bike but now surplus to requirements as I repaired the one on my bike
Looking for £100 which is what it owes me
Cash on collection from Sunbury Surrey or Richmond Surrey.
Will ship to UK for an extra £10
If anyone needs...
Hi i tried this today, Im not sure if it works on the road but it sits almost the same as my AT did. I fitted the swingarm from my 2000 AT onto my XL600v frame, The AT shock was too long but i tried the shock from a 650 TA and it slid straight in. It does look slightly lower than a pic of an AT...
Any offers for this? If interested, please PM me. I also have a new seat cover to go with it. Also happy to do a part exchange for some front calipers.
Collection from Sunbury Surrey TW16 or I can ship at cost.