Anybody fitted some ??
I tried to fit some today and failed
All bolted up and connected to the existing colour coded bullet connectors in the loom
Relay already in place and switchgear present & working
Fired up the bike, both rear indicators worked when...
One only. Guy asked me to make one & sold his bike in between!
200 x 100 overall with long edges folded back 22.5 degrees.
Mounting holes are clearance for M6. Made from Stainless Steel with brushed polish finish.
Stand off bushed will be needed but suggest using oversize nut or similar.
First of all, before you bite my head off, I am a total novice when it comes to engines and have only learnt a little through online research. I live in Hanoi and bought a used 2006 XR 400 (supermoto Japanese import). 10,000km on the clock. This is my first (big) bike and although there...
Hi everyone got myself a 2000 plate xr 400, it's had a crf fork conversion done.
Now my question is can someone help me please and measure from the ground to say the dip stick or somewhere.
I want to make sure that due to the forks being changed when I'm checking the oil it's accurate and...
Hi guys, i am looking for a green laner, possibly and XR 400 or something in the same vein, reliable and pretty much low maintenance. I have a black 03 plate CCM R30 at the mo which i am willing to part ex/swap for the right bike but if not just an outright purchase.. So what is there about in...
Hey all, first post!
I need to lower my pedal height but the clevis is pretty tight on the pushrod, i can't get anything to hold onto the pushrod as there is not enough room, but was wondering if I can remove the pushrod without leakage? I can't quite tell from the diagrams and wondered if...
I have an XR 400 '97 and I was looking for short levers both clutch and brake. I have found so many of them on ebay but they seem to be for XR motard models between 05-08 ??? Have anyone bought these and know if they fit on an XR 400 R ??
Hello all. I am on the look out for a good Honda XR400........ or possibly XR250.
I am looking to spend the top end of the current market value of the XR so obviously mechanical condition, age and mileage will be the main criteria I will be looking at.
I am located in Gloucestershire so if...
hi, just wondering if anyone can point me where i could try and obtain a workshop manual (cd, pdf, etc) for an XR400 in spanish for a friend. all he or i could find are in english and japanese. surely must be one in spanish,italian, german etc? thanks in advance.
For sale my Honda XR 400 had it around 4 years and it's been faultless, bur sadly time to go as I haven't used it much this year.
Good tyres with mousses plus a spare set of tyres.
Near new brake pads front and rear.
Swing arm bolt free and coppa slipped all bearing waterproof greased.
Just joined this forum as I have just bought an XR 400, all I know is that is a '96 as was the enduro version with next to no electrics judging by the rather crude wiring loom. My question is: would any of you know what would this bikes suffix be? Eg: rx, rv, 3ma etc.
Anyone have recomendations re the suspension on my XR400,needs to be on the cheap side as this is one of three bikes(and tbh the other 2 take priority)
Thinking maybe replacing the fluid in the forks and maybe just re-gassing the rear(i take it it is gas,but unsure of what?)
Any help would be...
hi, just got my xr 400 back together after being sat for 6 months without an engine and the rear suspension is really jumpy on the return, when i accelerate its like being on a rocking horse the back end is all over the place, i see the cylinder on the side of the shock has a valve and ive tried...