Honda XRV Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
could any one help with this i need timeing marks and clearance sizes inlet and exhaust
thanks simon
 

·
Generalissimo Tea Boy
Joined
·
6,031 Posts
Timing marks are FT and RT for front and rear cylinders. Make sure all three tappets move, if they don't, rotate another full turn.

Use a 0.15mm/ 0.2mm feeler gauge for inlet/exhaust.
 
1 - 3 of 3 Posts
Top