Honda XRV Forum banner

1 - 6 of 6 Posts

·
Space Emperor
Joined
·
640 Posts
Discussion Starter · #1 ·
I know this has been asked before - but a looong time ago. So was wondering what the closest match to the original handlebars (RD07a) is these days? Seems the Renthals Dakar High are somewhat lower, which is not something I'm interested in.
 

·
Space Emperor
Joined
·
640 Posts
Discussion Starter · #3 ·
Thanks, een705, but I have a ROX pivoting risers 50mm already ...

1R-P2SEK_560x560.jpg
 

·
Registered
Joined
·
1,412 Posts
i put some dakar high on project bike, previous owner had 'normal' renthals on. But when i started the rebuild, the front brake lines/accelerator cable etc didn't fit correctly (found to be the bars were too low) can't remember exactly, but it affected the revs or something like. I changed the bars & all is good, they appear to be the same height as orig, but that could just be me.
 
1 - 6 of 6 Posts
Top