Honda XRV Forum banner

at singlesided swingarm

1K views 4 replies 3 participants last post by  futter 
#1 · (Edited)
Hi All
As anyone seen africa twin with singlesided swinging arm. I'm looking at a vfr400. I've also looked at triumph/vfr750-800 all to big. The 400 looks the best candidate. If anyone has photo's or ideas would be much appreciated

I'm not in the safe house I'm in the nut house
:thumbup:

ps anyone coming to Barmouth/Porthmadog area. I.m getting fed up on my own
Sorry should have said its a 750 africa twin many sorries
 
#4 ·
I had a scout around the net on this one - I reckon that Honda would have used the same output shaft so there is a distinct possibility that at that end it will fit straight in. Suspension linkages are easy. If you can't put what comes off the shelf together, get it made. The only setback I can see is that the suspension travel of the shaft will be much less, therefore you will have to have a firmer, road biased setup. However, if you are fitting a 17" rim to the front then motard suspension should not be a problem.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top