Dommie custom in Bike mag

1 - 1 of 1 Posts

Fitz

Registered

Joined Mar 27, 2013

256 Posts

Discussion Starter • #1 • 10 mo ago

For those that like that kind of thing, the current issue of Bike magazine has a feature on a French-made custom from a Dommie donor bike.

July 2019 edition, page 20.

The engine, bash plate and front half of the frame look familiar, but that’s about all!

Sent from my iPhone using Tapatalk

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

rattling noise in engine

Dominator / FMX

Hi, I have a Dominator 94 with a Noisy engin. I just followed a thread here about it, but it ended and no one by then could figure out what the problem was. Can anyone here help me? its a metallic noise. Yes everything is working, and it starts without a problem and the noise doesn't affect the...
- 0
- 16
- Fernie68 · updated 4 h ago
More fun with indicators

Dominator / FMX

Hopefully someone wise and knowledgeable can help with this. I went to replace the little "position" bulb under the headlight on my Dommie because the bulb was blown. Turned out not to be the bulb but a loose wire somewhere. While I was pulling things apart I found this (see picture). At first...
- 8
- 239
- F
  Fitz · updated 12 d ago
Noob Owner - Replacement tank question

Dominator / FMX

Hi all, first time poster! I've acquired a 1992 Dominator from a mate. I haven't ridden a bike since I passed my test in 2003. The bike has had some efforts made to customise it; fairings removed, tank painted, headlamp replacement, Speedo removed... I'm hoping to give it the street tracker...
- 3
- 221
- J
  JimPC · updated 17 d ago
FX 650 Vigor ride height

Dominator / FMX

Hi to all, my first post here, hope I don't step on anyones toes! I have just bought a 2003 Vigor knowing it was going to be a bit high for me (short legs). I have been riding bikes for years ( Velocettes a favourite). Now I need a bike with an electric start, disc brakes, an alternator to keep...
- 5
- 123
- O
  Oldie77 · updated 19 d ago
FMX (Dominator) top speed 120km/h?

Dominator / FMX

Hello mates, I have my FMX650 for about half a year now. I had to invest in it a little to bring it up, because there were small problems all around. I have installed a carb dynojet kit, and new Continental TKC80 tyres, but of the same diameter. The front sprocket is 14T, but I think this is the...
- 4
- 173
- duonas · updated 21 d ago