fuel bottle holder
1 - 6 of 6 Posts
Joined
·
361 Posts
I'm sure I can get one more weekend out of it
Joined
·
689 Posts
I was lookin at fuel bottles in GO OUTDOORS two days ago,, they wanted 24 quid fur an actual fuel bottle,,, but i went wi a ally water bottle fur 2.99,,surley that will do the trick...an yes I aggree,, the holder is a bit nice fur the bodgers corner... but nice it is....am gonna make a tool holder.. or what ever ye want tae put in it... watch the new threads...
Joined
·
3,836 Posts
The seal is the bit that will loose you down and allow 2* everywhere. Get an O-ring the correct size instead.
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
fairing repair - which plastic?
Bodgers CornerMy AT's on it's third headlight fairing (or 'nose cowling' as the parts book calls it). The first two developed bad cracks around the holes into which the side fairing panels connect. I've kept the old fairings with an eye to trying to repair them and have now, after many years, got a plastic...- 2
- 1K
-
steinberg · updated
-
Exhaust Manifold Flanges
Bodgers CornerI'm working on a project with my VTR Firestorm getting some stainless steel split flanges fabricated in a small run. On the VTR v-twin the front pot gets hit by salty spray and heat and the OEM mild steel flange gradually disintergrates. Not helped that Honda set them as non removeable on the...- 4
- 792
-
Wicky · updated
-
YACO (Yet another Chain Oiler)
Bodgers CornerI wanted to get rid of the sticky spray lube for the chain and intended to build my own chain oiler.<br> My main objectives were: low tech, independent from motor vacuum or electricity/electronics. full manual control of the amount of oil being applied, depending on road or weather conditions...- 0
- 718
-
The first step to Carbon Fibre
Bodgers CornerWell, I decided to fabricate some Carbon Fiber parts for my RD07 and started to read/watch/ear/eat/sleep every kind of information I could get on the subject. £200 (in supplies) later, I started to make the mold for my first attempt. Although the pics make it look quite simple, ther is a lot...- 29
- 7K
-
scarfacehugo · updated
-
Need some help with a bodge
Bodgers CornerI have the engine out of the 1970 Triumph T120R TR6 I aquired in Germany and have need of some bodging advice from you experts out there... I have just taken the primary chain case off and totally de-greased it.. On closer inspection it looks like some ham fisted fool has hit it with a hammer...- 5
- 652
Join now to ask and comment!