Honda XRV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
126 Posts
Discussion Starter #1
Can anyone point me in the right direction as to were to get these - need 2 lost 1 and one will need drilled out to remove - large headed bolts on the front of the tank

thanks James
 

·
SHW'MAE BUTT
Joined
·
3,270 Posts
I had the same problem so I drilled them out and inserted 4 new M8 rivet nuts. I then uses stainless domed head (cheese head) bolts with a stainless washer looked very good, better than the soft steel used by Mr Honda.
 
1 - 2 of 2 Posts
Top