Honda XRV Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
69 Posts
Discussion Starter #1
Wanna stroke my piston :lol: Put this 77mm in last night , anyone Bristol way wanna give Fowlers a kick up the ass. Eight days n still no sign of my valves n camchain :cwm21:


 

·
Registered
Joined
·
69 Posts
Discussion Starter #3
Bristol boys put yer boots away they have arrived :)

Camchain + valves in


New pressure plate steels and fibres fittted .


I know its not much to some but it is to me as I've never endevoured to do a job like this on a bike afore . :)
 

·
Registered
Joined
·
113 Posts
New pressure plate steels and fibres fittted .


I know its not much to some but it is to me as I've never endevoured to do a job like this on a bike afore . :)
Hope you put the steel plates in the right way around, the smooth edge goes in first, otherwise you will get a jerky clutch as you pull away.
 

·
Registered
Joined
·
69 Posts
Discussion Starter #5
Hope you put the steel plates in the right way around, the smooth edge goes in first, otherwise you will get a jerky clutch as you pull away.
Do you know I ca'nt remember but seems ok at the mo .

Well he fired up first kick :D happy as a pig in poo .

Took him out for 20 mile not getting to high in the revs but working it up and down the box . I'll do 40 odd miles to work and back 2moz then do an oil change . Hopefully that'll be the rings bedded in .
Since doing the valve stem oil seals I can see in the garage ;)
 
1 - 5 of 5 Posts
Top