Hi guys.
I don't see how this makes sense ... but let me ask!
After installing kitpeds raiser kit (+6cm front and back) & removing db killer, my clutch slips.
Before I had no issue whatsoever (RD04 from 1992 with 87000km). I checked for free play on the clutch lever and there is more than enough.
When I accelerate slowly all is fine, when I open the throttle fully it slips from 5000rpm. I do have the feeling it's a bit more powerfull after removing the DB killer though (was fix welded).
Before all this I drove about 1000km without any issue (purchased the bike 1 month ago), do have to mention the lever is hard to squeeze (not like my previous rd04 where it was very smooth) , was planning to lube the cable in the next days.
Any ideas?
Thank you,
Wannes
I don't see how this makes sense ... but let me ask!
After installing kitpeds raiser kit (+6cm front and back) & removing db killer, my clutch slips.
Before I had no issue whatsoever (RD04 from 1992 with 87000km). I checked for free play on the clutch lever and there is more than enough.
When I accelerate slowly all is fine, when I open the throttle fully it slips from 5000rpm. I do have the feeling it's a bit more powerfull after removing the DB killer though (was fix welded).
Before all this I drove about 1000km without any issue (purchased the bike 1 month ago), do have to mention the lever is hard to squeeze (not like my previous rd04 where it was very smooth) , was planning to lube the cable in the next days.
Any ideas?
Thank you,
Wannes