Honda XRV Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
235 Posts
I had to go and check my rear sprocket bolts. I thought I'd had to replace at least one of the bolts, but my '03 650 still has all of the original socket head screws.
In my defence, I've owned the bike from new and performed all the chain and sprockets changes myself (6 or 7 not sure).
 

·
Registered
Joined
·
235 Posts
Ball ends are only intended for free moving, loosened bolts. They aren't intended to be strong enough to undo tight bolts.
I bought myself a set of 1/2" drive socket type wrenches for Allen heads. The 6mm broke years ago and has been replaced with an impact driver type.
 
1 - 2 of 2 Posts
Top