Joined
·
1 Posts
Does anyone know if there is running lights available (later model?) that would fit sockets for an 87 TransAlp XL600V H model Canadian bike??? Also a lighter than stock muffler recommended??!!
TransAlp 600 H model running lights, lighter muffler
Join the discussion
Recommended Reading
-
Grinding sound when accelerating
Mechanical AdviceHello, After change of clutch plates and springs on my AT RD04 750 1992 there is strange problem. When accelerating in first gear there is grinding sound (metal on metal). It starts at the moment of clutch release and last for one or two seconds. No problems in other gears or at any other...- 5
- 239
-
Nx650 oil strainer leak
Mechanical Advice3 days ago · #23 We’ll haven’t had much chance to work on my bike lately, just went out to have a look and plan some tasks and noticed that I got oil leaking from the strainer? I refitted the oil strainer with new o-ring and did it up as tight as I could but didn’t not have my torque wrench at...- 2
- 258
-
Facet fuel pump installation...long
Mechanical AdviceI have had my share of fuel pump woes in the past on my '99 @ and now I feel I have finally solved them with the recent install of this US made solid state Facet pump. Model # 40105 The original OEM pump failed after the contacts burned out. Probably not a 'bad' pump once it was modified for a...- 105
- 105K
-
GSPD750 · updated
-
CG125 Tank Badge
Mechanical AdviceIm Looking for tank badges/logo for my CG125 tank. The spacing between screw mounting holes is 60mm, but all the badges i can find on fleabay are 67mm spacing between holes. Anyone bought any of these in the past for their CG125 tank with 60mm hole spacing?- 1
- 147
-
CG125 Tank
Mechanical AdviceI have removed my fuel tap off my CG125 tank, and the in the hole where the fuel tap goes, there seems to be a plastic insert (looks like a tube). Can this be removed? Need to get everything removed before i flush out tank.- 1
- 136
Join now to ask and comment!