Honda XRV Forum banner
2K views 12 replies 7 participants last post by  alias 
#1 ·
I have a 2008 Varadero, and looking for a wire (live with the ignition on) to use as a signal wire. Any suggestions?
 
#8 ·
I managed to get at the wire right near the back light, bit tight but you only need to do it once.
I run heated grips, auxiliary socket, and lights from a fused 30 amp relay, overkill I know but as long as the fuse is correct for the accsesory all's good.
 
#10 ·
When I wanted to wire up some LED auxillery lights, I just ran the positive feed from the licence plate light. Ran the negative from the battery. Then just wired in the switch. Wasn't too hard. I do know that a few people have used that wire. Or a tail light. But to be honest I'd just tap in to the reg plate light.
 
#11 ·
you don't want a pair of spot light's on your varadero 1000 what you want is a pair of Mivv carbon cans and leave the disciple killers out :D they wont need to see you coming they will hear you . I have just been watching them on you tube sound's fantastic :thumbright: a hobby of mine is watching bikes on youtube different engine configurations and on board action recently I watched a Honda cb1100R on a race track a Honda cbx 1000 on board on a back road in spain best sounding triples . great entertainment . this video comes with a warning you may well shit the togs while watching this on a tv its that real . this is my kind of reality tv not some dick trapping bevers in the woods or rooting around through piles of shite in sheds :thumbright: hear we go :happy2: https://www.youtube.com/watch?v=KFJSVtsckyI and hears the mivv exaust on the varadero maybe this happy chap is a member hear ? https://www.youtube.com/watch?v=cNdvMO5aG3o and the cbx :cool: https://www.youtube.com/watch?v=WgSpZnOiS6E
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top