Hi,i'm new on the forum bt glad to be here.I bought my xl600RMG from someone who imported it from England to Uganda,East Africa.I now need to replace the piston,does any one know where I can find a piston kit for the same?
Hi Nick in brum,i figured out who Vic Eastwood is and I googled it up.Thanks very much for the lead.They are closed on Mondays and Sundays,i will try to catch-up with them for an inquiry tomorrow.Thanks once again.
I'm new to the XL, I have what I thought is a 1989 XL250R, when I've searched the internet the R model seems to have stopped production in 1987 and was replaced with the NX250, can anyone confirm this.
Having trouble with a weak spark on my Honda XL250R. We think the source coil is at fault but on test it gives 76 Ohms resistance. The correct resistance is unclear as the manual we have says reading should be in the range 200 to 500 Ohms. However later it says that for post 1981 the reading the...
Hi all - I have a US spec '79 XL500s-Z and I want to eliminate the US crankcase breather/collector, does the UK version have a plain pipe from crank case to air inlet rubber? Has anybody any other solution?
Front brake on my 1985 XL600 was getting spongy so after trying the obvious brake bleed I've order a kit online to do the master cylinder, but it's about 1mm too small in the old diameter measurements. I then ordered a second kit (from a different place) and was sent the same kit.
A forum community dedicated to Honda XRV Trail Bike owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more! Open to all Honda models including Transalp, XR, Varadero, Blackbird, NX400 and more.